CO2 Laser Marking Machine Big Working Area 300X300mm

Big Working Area Laser Marking Machine

• Model characteristics
  • Select 100W high quality CO2 laser, low consumables cost, good beam quality.
  • The full set of dynamic focused optical lenses is imported to ensure stable power during long working hours.
  • The vibration mirror adopts the FEELTEK high-speed dynamic module, with a fast response speed and stable operation.
  • The Lenmark-3D software is specially developed for a dynamic focus marking system for convenience and precision.
  • Software-readable format DXF, PLT, AI, DST, STL, NC, BMP, JPG, GIF and other vectors and bitmap formats.

two.Differences and advantages with the commercial glass pipe marking machine:

1. To solve the problem of astigmatism and focus at the starting point, you can make the very fine details can also be perfectly cut out, do half-cut bottom film torn very thin pattern will not be broken;

2. Solve the problem of inconsistent thickness and depth of the horizontal and vertical lines in a box;

3. Optical control adopts point-by-point dynamic compensation algorithm to ensure that the focus in the working amplitude and the color of the processing effect is more uniform

4. Refuse pirated software, lifetime free upgrade, software drive Microsoft official certification, to avoid the trouble of copyright problems in the export;

5. Software correction is carried out on the optical platform, with more accurate size and high-precision machining parts to ensure that the same type of machine uses the same library file, to avoid eliminating the trouble of correcting for each machine;

6. Each motor and the drive plate are accurately adjusted in the constant temperature laboratory to ensure the optimal matching and the fastest response, avoid the problem of distortion of letters and patterns when marking, and also play square rectangle when the corner delay 1;

7. The full set of dynamic focus and imported lens is used to ensure that the working power will not attenuate for a long time, and the efficiency is more than 30% higher than the same power laser marking machine;

• Vibration parameter

Four main configurations

Five model parameters

Scaling system:

working range 300X300mm - -The 600X600mm is adjustable

Maximum mark line speed 7000mm/s

System operating environment requirements

Environmental temperature requirements +10℃ ~ 30℃

Environmental humidity requirements Less than 70% without condensation

feed system

Power Supply Voltage 220V / 50Hz

Power consumption of whole machine: 1000W